|
Maximum drilling Ø |
|
|
|
maximum Ø of a hole drilled into steel of 600 MPa tensile strength |
mm |
100 |
|
maximum Ø of a hole drilled into grey iron of 250 MPa tensile strength |
mm |
110 |
|
maximum thread drilled into steel of 600 MPa tensile strength |
M |
76 |
|
maximum thread drilled into grey iron of 250 MPa tensile strength |
M |
100 |
|
Maximum vertical displacement (rise and fall) of the arm |
mm |
1155 |
|
Drilling head |
|
|
|
max. motion of the drilling head along the arm |
mm |
2 015 |
|
spindle nose Ø |
mm |
110 h 6 |
|
taper in the spindle |
MORSE |
6 |
|
maximum spindle travel |
mm |
475 |
|
number of spindle speed steps |
n |
32 |
|
spindle speed range |
min-1 |
9–2 800 |
|
number of feed rate steps |
n |
16 |
|
feed rate range |
mm.ot.-1 |
0,035–2,8 |
|
Main electric motor output |
kW |
11,0 (15,0) |
|
Total input required |
kVA |
13,6 (17,6) |
|
Principal dimensions and weight |
|
|
|
min./max. spindle reach |
mm |
550/2 565 |
|
min./max. distance from the spindle nose to the bed |
mm |
790/2 420 |
|
slide travel speed (50 Hz) |
m.min-1 |
10,5 |
|
slide travel speed (60 Hz) |
m.min-1 |
13,0 |
|
Bed |
|
|
|
height of the bed |
mm |
380 |
|
length and width of one bed |
mm |
3 500 x 1 280 |
|
width of the guide on the bed |
mm |
2 x 200 |
|
Weight (2 beds execution) |
kg |
16 500 |
